{"id":3505,"date":"2026-10-09T02:26:29","date_gmt":"2026-10-08T18:26:29","guid":{"rendered":"http:\/\/www.gryphontelematics.com\/blog\/?p=3505"},"modified":"2026-10-09T02:26:29","modified_gmt":"2026-10-08T18:26:29","slug":"what-is-the-difference-between-an-ids-and-an-ips-40cb-5baddd","status":"publish","type":"post","link":"http:\/\/www.gryphontelematics.com\/blog\/2026\/10\/09\/what-is-the-difference-between-an-ids-and-an-ips-40cb-5baddd\/","title":{"rendered":"What is the difference between an IDS and an IPS?"},"content":{"rendered":"

If you\u2019ve ever spent time poring over network security logs or sat through a late-night incident response call, you\u2019ve probably heard the terms IDS and IPS thrown around like they\u2019re part of the same toolbox. At our network security firm, we talk about this difference all the time\u2014usually with a customer asking why they need two separate systems when they just want to \u201ckeep the bad stuff out.\u201d The answer isn\u2019t just semantics; it\u2019s the line between a system that watches and a system that acts. Let\u2019s break this down like we would with a new client, no jargon for the sake of jargon. Network Security<\/a><\/p>\n

<\/p>\n

First, let\u2019s start with the basics: what each acronym stands for, because you can\u2019t tell the difference without knowing the names. IDS is Intrusion Detection System, and IPS is Intrusion Prevention System. On the surface, both are designed to spot malicious activity on a network, but that\u2019s where the similarities end. To make this concrete, let\u2019s use a real-world example from a client of ours last quarter. A mid-sized retail chain came to us after a phishing campaign that slipped past their basic antivirus software and landed on three sales associates\u2019 laptops. The antivirus caught the initial payload, but the attacker pivoted to their point-of-sale (POS) network to steal customer credit card data. After auditing their setup, we realized they only had an IDS deployed on their internal network. The IDS logged the unusual traffic from the sales floor to the POS server\u2014right down to the exact port numbers and packet sizes\u2014but it never did anything about it. By the time the security team got around to reviewing the logs, the damage was done. That\u2019s the core of IDS: it detects, it alerts, but it doesn\u2019t stop.<\/p>\n

Let\u2019s drill deeper into how an IDS works. Think of it as a security guard posted in the back office of a building, watching a bank of security cameras. The guard can see someone prying open a door, counting how many people are trying to access a restricted floor, or noticing an unusual amount of network traffic coming from a single IP address. An IDS monitors network traffic, endpoint activity, or both, and it uses two main methods to spot threats: signature-based detection and anomaly-based detection. Signature-based IDS works like a virus signature update\u2014if a packet matches a known pattern of malicious code (say, a Trojan that\u2019s been circulating for six months), the IDS flags it and sends an alert. That\u2019s great for known threats, but it\u2019s useless against zero-day attacks, which are threats that haven\u2019t been seen before and don\u2019t have a signature yet. Anomaly-based IDS, on the other hand, learns what \u201cnormal\u201d traffic looks like for your network. For example, if your POS server usually only sends and receives data during business hours, an anomaly-based IDS will flag traffic to that server at 2 a.m. as suspicious. The downside here is false positives\u2014lots of them. If a sales associate stays late processing end-of-month reports, the IDS might flag their off-hours traffic as malicious, which can overwhelm your security team with noise they have to sift through. That\u2019s exactly what happened with the retail client: their IDS logged the suspicious traffic, but their security team had so many other alerts to review that the POS breach went unnoticed.<\/p>\n

Now, what about IPS? That\u2019s the guard who doesn\u2019t just watch the cameras\u2014they intercept the intruder mid-prying, lock the restricted floor\u2019s door, and even call the police. An IPS is inline with your network traffic, meaning it sits between your internal network and the internet (or between segments of your internal network) and has the ability to block, drop, or modify malicious packets in real time. It uses the same detection methods as an IDS\u2014signature and anomaly-based\u2014but adds an active response layer. Let\u2019s circle back to that retail client. If they had an IPS on their internal network segment between the sales floor and the POS servers, when the attacker\u2019s malicious traffic tried to connect to the POS server, the IPS would have dropped that packet immediately. No alert to sift through, no breach, no customer data stolen.<\/p>\n

But it\u2019s not all upside with IPS. The same inline placement that makes it effective also makes it a potential bottleneck if it\u2019s not configured properly. If an IPS is too sensitive, it can block legitimate traffic\u2014for example, a sales associate trying to access the POS server from a hotel during a off-site conference, or a new vendor setting up a connection that the IPS doesn\u2019t recognize. Our team often works with clients to fine-tune IPS rules, so they\u2019re not blocking legitimate business while still stopping threats. We also tell clients that IPS isn\u2019t a set-it-and-forget-it tool; like IDS, it needs regular updates to its signature database, and its anomaly models need to be adjusted as your network grows and changes.<\/p>\n

Here\u2019s the part that confuses a lot of people: why not just use an IPS and skip the IDS? The answer is visibility. IDS provides something IPS can\u2019t: a complete, historical view of threats that have been detected. When an IPS blocks a malicious packet, it drops that traffic, so you never get a full picture of how the attack was unfolding. An IDS, even if it\u2019s not acting, logs every detail\u2014what IP address the attack came from, what techniques the attacker used, how many attempts they made. That data is critical for post-incident analysis. For example, if a client\u2019s IPS blocks a ransomware attempt, the IDS logs the ransomware\u2019s signature, the IP address of the command-and-control server it tried to connect to, and even the exact steps the malware was taking. That lets us update the IPS rules to better block that specific threat, and it helps the client harden other parts of their network to prevent future attempts.<\/p>\n

Another common misconception is that IDS and IPS are only for large enterprises. We work with small and medium-sized businesses (SMBs) all the time, and the difference matters just as much for them. A local dental practice, for example, might have a few dozen computers, a patient portal, and a network connected to their billing service. If they only have an IDS, they might see unusual traffic to their billing server but not have the resources to review logs regularly. Adding an IPS would let them automatically block that suspicious traffic without needing a full-time security team. We always advise SMBs not to cut corners here; even a basic IPS can prevent the kind of breach that puts a small practice out of business.<\/p>\n

Let\u2019s also talk about the different types of IDS and IPS to give you a more complete picture. There are network-based IDS (NIDS) and network-based IPS (NIPS), which monitor traffic across the entire network. Then there are host-based IDS (HIDS) and host-based IPS (HIPS), which are installed on individual endpoints like laptops or servers, watching activity on that specific device. For example, a HIDS on a sales associate\u2019s laptop might monitor for unauthorized changes to the operating system settings, while a NIDS across the entire network would watch for unusual traffic between the sales floor and the finance server. Together, they create a layered defense, which is the core of good network security.<\/p>\n

We\u2019ve seen too many clients make the mistake of deploying only one or the other, or treating them as interchangeable. One manufacturing client came to us a year ago with a breach that exposed their intellectual property for a new product. They had an IPS deployed at their internet gateway, but it was configured to be very lenient because they had frequent remote workers accessing the plant network. The IPS didn\u2019t block the attacker\u2019s traffic, but their IDS\u2014deployed internally to monitor the OT (operational technology) network for the factory floor\u2014did log the suspicious activity. The problem was, no one was checking the IDS logs for the OT network, because the security team was focused on the IPS alerts from the internet gateway. By the time they noticed, the attacker had stolen terabytes of design data. That\u2019s a classic example of why you need both: the IPS provides active blocking, but the IDS gives you visibility into what\u2019s happening across your entire network, including the parts that are less frequently monitored.<\/p>\n

So, to recap the key differences, let\u2019s list them out clearly:<\/p>\n

    \n
  1. Placement<\/strong>: IDS is out-of-band, meaning it doesn\u2019t sit in the direct traffic path. It copies traffic to monitor it, so it doesn\u2019t slow down the network. IPS is inline, so it processes all traffic and can block it in real time, which does add a small amount of latency (a tradeoff for security we manage with hardware and software tuning).<\/li>\n
  2. Function<\/strong>: IDS detects and alerts; it doesn\u2019t stop traffic. IPS detects and acts\u2014blocks, drops, or modifies malicious traffic.<\/li>\n
  3. Visibility vs. Action<\/strong>: IDS provides a historical, detailed log of threats, which is crucial for analysis and improving security. IPS stops threats but doesn\u2019t retain that same level of detail about the traffic it blocks.<\/li>\n
  4. Use Cases<\/strong>: IDS is ideal for monitoring the entire network, creating baseline normal traffic, and investigating incidents after they happen. IPS is ideal for real-time protection, especially at network perimeters or between high-risk segments like OT and IT networks.<\/li>\n<\/ol>\n

    Now, the biggest question: which one do you need? For most businesses, the answer is both. We always recommend a layered approach: deploy NIDS across your entire network to get full visibility, deploy HIDS on critical endpoints like servers and workstations that handle sensitive data, and pair that with NIPS at your internet gateway and between high-risk network segments to block threats in real time. Then, make sure someone is reviewing the IDS logs regularly\u2014whether that\u2019s your internal IT team or a managed security service provider like ours.<\/p>\n

    <\/p>\n

    At the end of the day, network security isn\u2019t about picking a single tool and calling it done. It\u2019s about understanding what each tool does, how they work together, and deploying them in a way that fits your business\u2019s needs. If you\u2019re not sure whether your current setup has the right balance of detection and prevention, or if you\u2019ve only been using one and want to add the other, our team is here to help. We work with businesses of all sizes to audit their network, fine-tune their IDS and IPS rules, and make sure they have the visibility and protection they need to keep their data and their customers safe. Don\u2019t wait until you have a breach to realize the difference between detecting a threat and stopping it is the line between recovery and costly damage. Reach out to our team to discuss your network security needs and get a customized plan for your business today.<\/p>\n

    Network Security<\/a> References
    \nScarfone, K., Mell, P. (2007). Guide to Intrusion Detection and Prevention Systems (IDPS). National Institute of Standards and Technology (NIST) Special Publication 800-94.
    \nRescorla, E. (2001). Security Engineering: A Guide to Building Dependable Distributed Systems. John Wiley & Sons.
    \nKruse, W. H., Jr., Heiser, J. G. (2001). Intrusion Detection: A Manager\u2019s Guide. Addison-Wesley.<\/p>\n

    \n

    Shenzhen TFNEW Technology Co., Ltd.<\/a>
    Shenzhen TFNEW Technology Co., Ltd. is is one of the most professional network security manufacturers and suppliers in China, also supports customized service. We warmly welcome you to wholesale bulk cheap network security from our factory. If you have any enquiry about cooperation, please feel free to email us.
    Address: Room 408, Block F, Zhantao Commercial Plaza, No. 376 Longhua Jianshe Road, Longping Community, Dalang Sub-district, Longhua District, Shenzhen City
    E-mail: jack@tfnew.com
    WebSite:     https:\/\/www.tfictai.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019ve ever spent time poring over network security logs or sat through a late-night incident … What is the difference between an IDS and an IPS?<\/span>Read more<\/a><\/p>\n","protected":false},"author":958,"featured_media":3505,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3468],"class_list":["post-3505","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-network-security-4889-5c8149"],"_links":{"self":[{"href":"http:\/\/www.gryphontelematics.com\/blog\/wp-json\/wp\/v2\/posts\/3505","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.gryphontelematics.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.gryphontelematics.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.gryphontelematics.com\/blog\/wp-json\/wp\/v2\/users\/958"}],"replies":[{"embeddable":true,"href":"http:\/\/www.gryphontelematics.com\/blog\/wp-json\/wp\/v2\/comments?post=3505"}],"version-history":[{"count":0,"href":"http:\/\/www.gryphontelematics.com\/blog\/wp-json\/wp\/v2\/posts\/3505\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.gryphontelematics.com\/blog\/wp-json\/wp\/v2\/posts\/3505"}],"wp:attachment":[{"href":"http:\/\/www.gryphontelematics.com\/blog\/wp-json\/wp\/v2\/media?parent=3505"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.gryphontelematics.com\/blog\/wp-json\/wp\/v2\/categories?post=3505"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.gryphontelematics.com\/blog\/wp-json\/wp\/v2\/tags?post=3505"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}